Audio Mixer: Technical Specs

From AVObjects Knowledge Base
(Difference between revisions)
Jump to: navigation, search
Line 31: Line 31:
 
Notes:
 
Notes:
  
* All input frequencies should be identical (resampling not implemented in current version).
+
* All input frequencies and bits per mono samples should be identical (resampling not implemented in current version).
  
* After start of graph the media type of output pins cannot be changed (mono to stereo and vice versa).
+
* Only 8 or 16 bits per mono samples supported in current version
 +
 
 +
* After start of graph the media type of output pins cannot be changed.
  
 
The filter will have a COM interface and property page for set/get parameters of mixing (Input/channel -> Output/channel).
 
The filter will have a COM interface and property page for set/get parameters of mixing (Input/channel -> Output/channel).

Revision as of 17:18, 27 May 2010

Audio Mixer DirectShow specs.

Audio mixer is a standard DirectShow filter.

Number of input pins >= 1 (new pin will be added after connection of all free input pins).

Number of output pins >= 1 (new pin will be added after connection of all free output pins).

Input/output media type:

 majortype:
   MEDIATYPE_Audio
 subtype:
   MEDIASUBTYPE_PCM
 formattype:
   FORMAT_WaveFormatEx
 cbFormat, pbFormat:
   WAVEFORMATEX struct (wFormatTag = WAVE_FORMAT_PCM) for nChannels = 1 or 2 only
   WAVEFORMATEXTENSIBLE struct (Format.wFormatTag = WAVE_FORMAT_EXTENSIBLE)

Parameters of format:

WAVEFORMATEX::nSamplesPerSec and WAVEFORMATEX::wBitsPerSample: the same for all inputs/outputs.

WAVEFORMATEX::nChannels from 1 to 32. Can be different for different input/output pins.

Any channel(s) of any input pin(s) can be mixed with any other channel(s) of same or other input pin(s). Mixing coefficients can be changed in play time also (without graph stop).

Notes:

  • All input frequencies and bits per mono samples should be identical (resampling not implemented in current version).
  • Only 8 or 16 bits per mono samples supported in current version
  • After start of graph the media type of output pins cannot be changed.

The filter will have a COM interface and property page for set/get parameters of mixing (Input/channel -> Output/channel).

Personal tools