Vision Mixer SDK: FAQ

From AVObjects Knowledge Base

(Difference between revisions)

Revision as of 14:24, 27 August 2008

This is a FAQ page for Vision Mixer SDK.

I tested the current object and it only allows a still background. Can another live source be possible as the background source?

Yes, of course. You can chroma-key one video stream over other. For this you need to do the following:

1) Select one stream as background (e.g. select 'First' scene, and by reordering select the desired stream).

2) Add second (overlayed) stream (select the desired stream, 'Add Rect', select input/output rects, or whole rects by right click).

the second stream (depends from selected rects).

3) Configure chroma-key for second stream.

@@ Line 1: / Line 1: @@
 This is a FAQ page for [[Vision Mixer SDK]].
+'''I tested the current object and it only allows a still background. Can another live source be possible as the background source?'''
+Yes, of course. You can chroma-key one video stream over other. For this you need to do the following:
+) Select one stream as background (e.g. select 'First' scene, and by reordering select the desired stream).
+) Add second (overlayed) stream (select the desired stream, 'Add Rect', select input/output rects, or whole rects by right click).
-  jmcm> I tested the current object and it only allows a
-jmcm> still background. Can another live source be possible as the background
-jmcm> source ?
-Yes, of course you can chroma-key one video stream over other.
-Fro do this you need to do the next steps:
-) Select one stream as background (e.g. select 'First' scene, and by
-reordering select the desired stream).
-) Add second (overlayed) stream (select the desired stream, 'Add
-Rect', select input/output rects, or whole rects by right click).
 ** After this step you should see the second stream over first or only
 the second stream (depends from selected rects).
-) Configure chroma-key for second stream.
+) Configure chroma-key for second stream.
 [[Category:FAQs]]